| Payment Type: | L/C,T/T |
|---|---|
| Incoterm: | FOB,CFR,CIF,EXW |
| Min. Order: | 1 Set/Sets |
| Delivery Time: | 20-30 Days |
Basic Info
Certification: CE, ISO
Veneer Thickness: 0.5-5mm
Dryer Type: Roller Veneer Dryer
Working Width: 5mm
Additional Info
Packaging: exporting packing
Productivity: 15-100cbm per day
Brand: Shine
Transportation: Ocean,Land
Place of Origin: China
Supply Ability: 10 set per month
Certificate: ISO,CE
HS Code: 8419320000
Port: Qingdao
Product Description
The 20m-60m Core Veneer Plywood Dryer produced by Shandong Shine Machinery Co., Ltd. is widely used in flatting drying of high-grade plywood, multi layer board and architectural core face veneer.the timber core veneerplywood dryer is equipped with environmental protection type hot air stove. its characteristics: save fuel, twice use of hot air , increase heating speed.the veneer after drying is flat,moisture content is up to national standard. Equipped with integral type high efficiency energy saving hot air stove. No boiler and other auxiliary equipment, no use water,coal, electricity. Rind ,wood chips and wood craps are all can be as fuel. and can quickly achieve the heat required by the timber core veneer plywood dryer. Roller Veneer dryer is one of the main equipment in plate production. The quality of veneer drying directly affects the quality of veneer and glued products. The design of hot air continuous roller press is based on the most advanced continuous pressure contact veneer drying technology in the world. The working principle is that the veneer is clamped by the upper and lower seamless steel tube rollers, and the oven temperature reaches 140 ℃ by preheating, and then enters between the upper and lower rollers and blows high pressure hot air to the upper and lower sides of the veneer through the hot air pipe for rapid drying. So it can make the veneer smooth and moisture content even after drying, and it also has the characteristics of direct contact heat transfer between high temperature roller and wet veneer, high thermal efficiency, low heat loss and reducing heat energy consumption
1. The veneer after drying by Shine veneer dryer is smooth and the moisture content is uniform, and the high temperature drum has direct contact with the wet veneer for heat transfer, and the heat efficiency is high, the heat loss is small, and the heat loss is reduced. the selling price for veneer dried by roller veneer dryer is higher than natural drying.
2.The roller veneer drying machine adopts frequency conversion to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect .
3.Shine core veneer dryer or face veneer dryer covers a small area, less ancillary equipment, convenient for transportation, quick installation, and can be put into use quickly and conveniently.
4.Standardized production models, can make different sections or decks according to different capacity requirements, which can meet different customers' requirements.
5.Each section with heat exchanger, which can make full use of the heat and achieve the best drying effect.
6. The fuel source can be the waste wood after peeling or the tree bark ,which can reduce the fuel cost greatly for the user.
1.All kinds of mold can be made by customer's requirements
2.All price are based on FOB.QINGDAO,China
3.Payment;by T/T or L/C.
4.All the Parameters above just for reference,for they are updating all the time
5.Package:Standard packing
6.Warranty:All the machine enjoys one year's warranty,in this period
7.Any problems of machine,please feel free to contact us.We will try our best to make it.
Pre-sale services:
1) Provide the free consultation of all Core Veneer Dryer Machine
2) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
3) Welcome to visit our factory
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment
3) Train the first-line operator.
After sale services:
1) 24 hours online service
2) Provide the VIDEO with Install and debug the equipment
3) Provide technical exchanging
4) Door to door service is possible
|
Parameter Model |
DHS44M
|
DHS48M |
DHS52M |
DHS56M |
DHS60M |
|
Work width(m) |
3 |
3 |
3 |
3 |
3 |
|
Layer |
2 |
2 |
2 |
2 |
2 |
|
Veneer thickness(mm) |
0.5-5 |
0.5-5 |
0.5-5 |
0.5-5 |
0.5-5 |
|
Heating area (m)
|
40 |
44 |
48 |
52 |
56 |
|
Cooling area (m) |
4 |
4 |
4 |
4 |
4 |
|
Initial water content(%) |
50-80 |
50-80 |
50-80 |
50-80 |
50-80 |
|
Finished water content(%) |
10 |
10 |
10 |
10 |
10 |
|
Drying capacity (m³/h) |
2.7-3.1 |
3-3.3 |
3.2-3.5 |
3.5-3.8 |
3.8-4.1 |
|
Heat exhaustion(10000 kcal) |
94.5-108.5 |
105-115.5 |
112-122.5 |
122-132 |
132-143 |
|
Total power (kw) |
154 |
169 |
180 |
198 |
209 |
|
Overall size LxWxH(m) |
44*4.5*2.27 |
48*4.5*2.27 |
52*4.5*2.27 |
56*4.5*2.27 |
60*4.5*2.27 |
We are the manufacturer of Core Veneer Dryer Machine from China . More details please contact us.
© 2019 CHINA WAY. All Rights Reserved. Shandong Shine Machinery Co.,Ltd, Inc. All rights reserved. site map. sitemap.html
.png)
Contact Now